ElRaph(W)ik(i)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Hardware setup ======

==== The RasPi ====

For the board, I opted for a Raspberry Pi CM5116032. This model designation reads as follows : 
  - CM5: The form factor / generation, compute module gen 5
  - 1: WiFi & Bluetooth 
  - 16: The amount of RAM in GB
  - 032: The size of the eMMC present on the board, in GB once again.

So this board is pretty much the best money could buy. Firstly I opted for a CM5116064 but the vendor had an availability issue because of the early 2026 shortages, so I had to get the model right under.

Since the OneUp does not have a RJ45 port, and has an antenna, I chose to get the board with WiFi. 

Although this system seems like the best choice, I will have problems later-on during the firmware setup...

==== Dedicated Storage ====

Considering 32GB of storage is pretty short, I opted to get myself a Gen 3 NVME SSD, as it is supported into the OneUp, with 1TB of storage. Once again I would've liked a little more storage but the prices went crazy for 2TB and more. 1TB is still plentiful for experimenting around.

This storage will not be separated in many blocks, it'll be a single large storage for /home, and it'll be encrypted.